PRACTICAL GUIDE · WINDOWS

Reduce a steady hum in a voice recording

Use a short selection that contains both the hum and speech. Comparing the same phrase lets you check what the repair does to the voice before applying it to the full clip.

Quick Steps
  1. Select a phrase and a short pause.
  2. Analyze with De-hum in Repair Studio.
  3. Compare dry and wet previews, then export a new WAV.

Cool Record Edit Pro · 8.1.0 · Recording, editing and WAV export free; other supported exports require registration

Pick a phrase where you can hear the hum

Open a working copy of your recording. Listen during a pause to check for a steady tone. Select a few seconds that contain the pause and nearby speech. If the issue is a sharp click or a breath, use the corresponding repair guide or control.

Compare the same phrase at the same playback volume

  1. Open Process → Repair Studio… and select De-hum. Analyze the sample with the other repair options off so you can hear which change matters.
  2. Switch between Preview dry and Preview wet. Keep the playback volume fixed. Listen for the hum in the pause and the clarity of consonants when the voice resumes.
  3. Use Apply repair if the hum is less audible and the voice still sounds useful. If the result weakens the voice, keep the current file and revisit the selection. For hum that changes between paragraphs, test each affected section before applying the same settings throughout.

Save an edited WAV and compare it with the original

Export a WAV copy with a new name. Play the same phrase in both files and confirm you kept the source. Recording, editing and WAV export are available without registration in Cool Record Edit Pro for Windows.

Keep Going